Important safety information
Provide proper
ventilation. Refer to the installation instructions in the manual for
details on installing the product so it has p roper ventilation.
Slots and open
ings are provided for ventilation and should never be covered or
otherwise obstructed. Do not push objects into a ny of the openings.
Provide a safe working environment. Always place the product in a location
convenient for v iewing the display and indicators.
Be sure your work area meets applicable ergonomic standards. Consult with an
ergonomics professional to avoid stress injuries.
Use only the Tektronix rackmount hardware specified for this product.
Servicesafetysummary
The Service safety summary section contains additional information required to
safely perform service on the product. Only qualified personnel should perform
service procedures. Read this Service safety summary and the General safety
summar
y before performing any service procedures.
To avoid electric shock. Do not touch exposed connections.
Do not service alone. Do not perform internal service or adjustments of this
product unless another person capable of rendering first aid and resuscitation is
pres
ent.
Disconnect power. To avoid electric shock, switch off the product power and
disconnect the power cord from the mains power before removing any covers or
panels, or opening the case for servicing.
Us
e care when servicing with power on. Dangerous voltages or currents may exist
in this product. Disconnect power, remove battery (if applicable), and d isconnect
test leads before removing protective panels, soldering, or replacing components.
Verify safety after repair. Always recheck ground continuity and mains dielectric
strength after performing a repair.
vi ECO8000 Series Automatic Changeover Unit User Manual
To Next Page
Loading...
Need help?
General
