Tektronix ECO8000 Series User Manual

Menus
TIMEZONE OFFSE
T. Select this menu item to view and edit the internal time zone
offset of the instrument. Press the ENTER button to edit the time zone offset. Use
the left (◄)orright(►) arrow button to select one of the offset digits, and then
use the up (▲)ordown(▼) arrow button to edit the selected offset digit. Press
the ENTER button to implement the new local time zone offset.
NOTE. The time zone offset must be set to maintain the correct relationship
between UTC
and local time.
DST SCHEDULE submenu
To access this menu, select DST SCHEDULE in the INTERNAL CLOC K menu
and press the ENTER button. Use this menu to enable or disable the Daylight
Savings Time function, set the DST offset, and to set the start date and time as
well as the end date and time of the DST function. Use the up (▲) and down (▼)
arrow bu
ttons to scroll through the menu selections.
Figure 27: DST SCHEDULE submenu
ECO8000 Series Automatic Changeover Unit User Manual 81

Tektronix ECO8000 Series Specifications

General

Brand	Tektronix
Model	ECO8000 Series
Category	Control Unit
Language	English