Menus
EVENT LOG (BY TIME)
submenu
To access this m
enu, select EVENT LOG (BY TIME) in the STATUS menu and
press the ENTER button. (See page 56, STATUS menu.) Use this submenu to view
the last 1024 events sorted by the time o f their occurrence. (See page 48, How to
use the Event Log and event history.)
The oldest event, if any, is displayed first. Press the right (►) arrow button to
advance through the time-ordered list, or press the left (◄) arrow button to view
the most recent fault and to progress backwards through the list.
The display readout shows “No event in the log” if no events have occurred. If
an event has occurred, the display readout shows the event date and time in the
following format: MM:DD:YYYY HH :MM:SS.
Figure 16: EVENT LOG (BY TIME) submenu
LAST EVENT BY TYPE
submenu
To acc
ess this m enu, select LAST EVENT BY TYPE in the STATUS menu and
press the ENTER button. (See page 56, STATUS menu.) Use this submenu to view
the last instance of each event type, regardless of how many events of other types
have occurred. (See page 48, How to use the Eve nt Log and event history.)
Press the up (▲)ordown(▼) arrow button to select an event type. The display
readout shows “No occurrence found” if no events have occurred for an event
type. If an event has occurred, the display readout shows the event date and time
in the following format: MM:DD:YYYY HH:MM:SS.
The menu readouts appear in the same order as in the EVENT LOG (BY TYPE)
submenu. (See Figure 13 on page 58.)
ECO8000 Series Automatic Changeover Unit User Manual 61
To Next Page
Loading...
Need help?
General
