4200A-SCS Parameter Analyzer User's Manual Section 7: Make C-V measurements on a MOSCAP
4200A-900-01 Rev. D/April 2020 7-9
The next figure shows some of the equations that are included with this test. In the Constants
area of the Formulator, you can change the constants that are used in the formulas, such as the
gate area and temperature.
Figure 93: Formulas listed in the Formulator
7. Select OK to accept changes made in the Formulator.
8. From the Terminal Settings Advanced dialog box, adjust the parameters as needed.
Figure 94: Terminal Settings pane and Terminal Settings Advanced dialog box
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
