Section 9: PMU for pulsed I-V measurements on a MOSFET 4200A-SCS Parameter Analyzer User's Manual
9-8 4200A-900-01 Rev. D/April 2020
3. From the Test Settings pane and Advanced Test Settings dialog box, adjust the Pulse Settings
and Timing Parameters, as needed.
Figure 133: Test Settings pane and Test Settings Advanced dialog box
4. From the Terminal Settings pane and Advanced Terminal Settings dialog box, you can adjust the
voltage source and current measurement parameters, as needed.
Figure 134: Terminal Settings pane and Terminal Settings Advanced dialog box
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
