4200A-SCS Parameter Analyzer User's Manual Section 9: PMU for pulsed I-V measurements on a MOSFET
4200A-900-01 Rev. D/April 2020 9-7
2. From the Key Parameters pane, adjust the pulse voltage sweep levels of PMU1-2 on the Drain
terminal and the Pulse Step Voltage of PMU1-1 on the Gate terminal, as needed.
Figure 132: Key Parameters pane for the pulse-vds-id test
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
