4200A-SCS Parameter Analyzer User's Manual Section 4: Use the RPM to switch the SMU, CVU, and PMU
4200A-900-01 Rev. D/April 2020 4-11
6. Select OK to accept the settings.
7. Select Terminal Settings.
8. Select Advanced.
9. Adjust the voltage source and current measurement parameters as needed.
Figure 42: Terminal Settings pane and Terminal Settings Advanced dialog box
10. Select OK to accept the changes.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
