4200A-SCS Parameter Analyzer User's Manual Section 4: Use the RPM to switch the SMU, CVU, and PMU
4200A-900-01 Rev. D/April 2020 4-13
4. On the Test Settings pane, select Advanced. Adjust the timing parameters as needed. Be sure to
include the sweep delay time in your adjustments.
Figure 44: Test Settings pane and the Test Settings Advanced and Formulator dialog boxes for
the cv-diode sweep test
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
