Tektronix Keithley 4200A-SCS - Page 57

Section 4: Use the RPM to switch the SMU, CVU, and PMU 4200A-SCS Parameter Analyzer User's Manual
4-14 4200A-900-01 Rev. D/April 2020
5. On the Terminal Settings pane and the Terminal Settings Advanced dialog box of the Anode
terminal, adjust the parameters.
If you are including cable compensation values, run the Tools menu option CVU Connection
Compensation. Refer to Perform offset compensation (on page 7-10) for more detail.
Figure 45: Terminal Settings pane and the Terminal Settings Advanced dialog box for the
cv-diode sweep test
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com