Tektronix Keithley 4200A-SCS - Page 59

Section 4: Use the RPM to switch the SMU, CVU, and PMU 4200A-SCS Parameter Analyzer User's Manual
4-16 4200A-900-01 Rev. D/April 2020
4. Select the Anode terminal.
5. Select Terminal Settings.
6. Select Advanced to configure the measurements as needed, including spot mean, PMU
compensation, and PMU threshold levels.
Figure 47: Terminal Settings pane and the Terminal Settings Advanced dialog box for
Pulse-Diode test
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com