4200A-SCS Parameter Analyzer User's Manual Section 4: Use the RPM to switch the SMU, CVU, and PMU
4200A-900-01 Rev. D/April 2020 4-17
7. Select OK.
8. Select the Cathode terminal.
9. Select Test Settings.
10. Select Advanced to adjust the test mode and pulse timing settings, as needed.
Figure 48: Test Settings pane and the Test Settings Advanced dialog box for the Pulse-Diode
test
11. Select OK to accept the changes.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
