Tektronix MSO3000 Series - Page 156

Save and Recall I
nformation
Printing to a PictBridge Printer
To set up the oscilloscope to print to a PictBridge printer:
1. Push Utility.
2. Push Utility Page.
Utility
Page
3. Turn multipurpose k nob a and select I/O .
I/O
4. Push USB.
Utility
Page
I/O
USB
Printer
Ethernet
Network
Settings
GPIB
1
USB
Device
Port
Connect to
Computer
5. Push Connect to PictBridge Printer.
Connect to
PictBridge
Printer
Disabled
(Off bus)
To add an Ethernet printer to the list, refer to that topic. (See page 135, Printing Over Ethernet.)
134 MSO3000 and DP O3000 Series Oscilloscopes User Manual