Tektronix TAS 475 Service Manual

•
•
•
Repackaging, Information
If you ship the TAS 475 or TAS 485, pack it in the original shipping carton
and packing
material. If the original packing material is not available, pack-
age the instrument as
follows:
1. Obtain a corrugated cardboard shipping carton with inside dimensions
at
least 15 cm (6 in) taller, wider, and deeper than the TAS 475 or
TAS 485. The shipping carton must be constructed of cardboard with
170 kg (375 pound) test strength.
2. If you are shipping the TAS 475 or TAS 485 to a Tektronix field office for
repair, attach a tag to the
oscilloscope showing the instrument owner
and address, the name of the person to contact about the instrument,
the instrument type, and the
serial number.
3. Wrap the oscilloscope with polyethylene sheeting or equivalent material
to protect the finish.
4. Cushion the oscilloscope in the shipping carton by tightly packing
dunnage or urethane foam on
all sides between the carton and the
oscilloscope. Allow 7.5 cm (3 in) on all sides, top, and bottom.
5. Seal the shipping carton with shipping tape or an industrial stapler .
TAS 475 and TAS 485 Service Manual
6-49
Scan by Zenith

Tektronix TAS 475 Specifications

General

Brand	Tektronix
Model	TAS 475
Category	Test Equipment
Language	English