Tektronix TAS 475 - Option 22: Additional Probes; Option 23: Additional Probes - (TAS 475)

Product Description
1-4
The bar cursors remain displayed even if you change the function of the
General Purpose Knob. This
allows you to use them as reference pOints or •
markers to easily identify if measurement signals remain within the parame-
ters set
by the cursors. Remove the cursor display by turning the cursor
measurement off.
Option 22: Additional Probes
With this option, Tektronix ships two additional probes identical to the two
standard-accessory probes normally shipped with the instrument (P6109B
for the TAS 475 and P6111 B for the TAS 485). This provides one probe for
each front-panel input.
Option 23: Additional Probes - (TAS 475)
Probes (quantity two), 10X Passive; 100 MHz
(TAS 475)
Probes (quantity two), 10X Passive; 200 MHz
(TAS 485)
P6109B Probe Manual (TAS 475)
P6111 B Probe Manual (TAS 485)
P6109B (single unit)
P6111 B (single unit)
070- 7849-01
070 - 8543 - 00
Specifications
•
•
Scan by Zenith