Tektronix TAS 475 - Figure 2-6: How Probe Compensation Affects Signals; Figure 2-7: Location of Probe Head Adjustment

•
•
•
Quick Start
Probe Compensated Correctly
Probe
Over Compensated
----Ir l r l __
Probe Under Compensated
Figure 2-6: How Probe Compensation Affects Signals
11. Adjust the low frequency compensation adjustment, located in the
probe body, for the best possible square wave. See Figure 2-7 for the
location of the low frequency adjustment.
Low-frequency
Adjustment
P6109B Probe Compensation
P6111 B Probe Compensation
Figure 2-7: Location of Probe Head Adjustment
TAS 475 and TAS 485 Service Manual
2-7
Scan by Zenith