MEAS
3–38
THS710A, THS720A, THS730A & THS720P User Manual
Choosing Statistics. Choose up to three from the following statistics.
Statistic Definition
Max The maximum value of all meter readings since the last reset.
Avg The arithmetic average of all meter readings since the last
reset.
Min The minimum value of all meter readings since the last reset.
D0 The baseline value used in the RelD calculation. This value is
updated only when the RelD function is turned on or off.
Max–Min The difference between the maximum and minimum meter
readings since the last reset.
Reset Conditions. The calculated statistics are reset to zero if you
make any of the following control changes:
H Turn off the HOLD function
H Change the measurement function (from VAC to VDC, for
example)
H Change the probe scale factor
H Change the RelD value
H Change the data logger scroll speed
Beep New Max/Min. You can turn on a beep that sounds any time the
TekScope instrument updates the Max or Min statistic.
To Next Page
Loading...
Need help?
General
