THS710A, THS720A, THS730A & THS720P User Manual
C–1
Appendix C: Accessories
Standard Accessories
P6117 10X Passive Probes (THS730A, THS720A, and THS710A)
The P6117 10X passive probes have 200 MHz bandwidth and a
CAT II voltage rating of 300 V
RMS
. These probes are suitable for
floating measurements up to 30 V
RMS
.
P5102 10X Passive Probes (THS720P)
The P5102 10X passive probes have 100 MHz bandwidth and a
CAT II voltage rating of 1000 V
RMS
. These probes are suitable for
floating measurements up to 600 V
RMS
.
Meter Lead Set
The standard pair of meter leads (012-1482-00) provides sharp
tips for probing, two screw-on plunger tips for grabbing test points
or small conductors, and two screw-on insulated alligator clips for
grabbing terminals or larger conductors.
Battery Pack
The TekScope instrument includes one high-capacity (4.8 V,
2.8 A⋅hr), rechargeable battery pack. Refer to THS7BAT on
page C–3.
AC Power Adapter
The AC power adapter allows operation from the AC power line
and charges the internal battery. (North American 119-4812-XX,
Universal European 119-4813-XX, United Kingdom 119-4922-XX,
Japan 119-4923-XX)