Getting Started
1–2
THS710A, THS720A, THS730A & THS720P User Manual
Oscilloscope Features
The TekScope instrument is a powerful, two-channel oscilloscope
with the following features:
H Autoranging for quick setup and hands-free operation
H 200 MHz (THS730A), 100 MHz (THS720A and THS720P) or
60 MHz (THS710A) bandwidth with selectable 20 MHz
bandwidth limit
H 1 GS/s (THS730A), 500 MS/s (THS720A and THS720P), or
250 MS/s (THS710A) sample rate and 2,500 point record length
H Separate digitizers for each channel (both channels always
acquire simultaneously)
H Waveform averaging and enveloping with hardware peak
detection
H Digital Real Time digitizing (up to five-times oversampling),
sin(x)/x interpolation, and peak-detect acquisition to limit the
possibility of aliasing
H Independently isolated channels to allow improved safety for
measurements to 1000 V
RMS
while floating up to 600 V
RMS
using P5102 probes
H Cursors and 21 continuously updated, automatic measurements
H Simultaneous oscilloscope and meter operation on the same or
on separate signals
H Advanced pulse, video, external, and motor trigger (THS720P)
capabilities
H Harmonic analysis and power measurements (THS720P)
To Next Page
Loading...
Need help?
General
