VERTICAL Controls
THS710A, THS720A, THS730A & THS720P User Manual
3–73
Key Points
Zoom. You can get a close view of the data logger plot using the
Zoom selection. The plot is vertically enlarged around the center of
the screen for the VDC function, and around the bottom of the screen
for other meter functions. Before you choose Zoom, you can choose
Position or use the vertical POSITION rocker to move the plot.
Noise Reject. You can improve the repeatability of AC measurements
in the presence of 50 Hz or 60 Hz noise by choosing noise rejection.
Volts Scale. If you choose dB, the current measurements, statistics,
and logger data are shown in dB. If you choose dBm, you can set the
impedance.
VOLTS/DIV Rocker. Use the VOLTS/DIV rocker to change the meter
range and the vertical scale of the data logger plot.
POSITION Rocker. Use the vertical POSITION rocker to position the
data logger plot.
To Next Page
Loading...
