Appendix A: Specifications
THS710A, THS720A, THS730A & THS720P User Manual
A–19
General Specifications (Cont.)
Mechanical
Siz
Height 8.53 in (217 mm)
Width 6.95 in (177 mm)
Depth 2.00 in (50.8 mm)
ight With battery installed 3.2 lbs (1.5 kg)
With all standard
accessories in soft
carry case
7.5 lbs (3.4 kg)
When packaged for
domestic shipment
9.0 lbs (4.1 kg)
Certifications and Compliances
Certifications Listed UL3111-1 and CAN/CSA-C22.2 No. 1010.1-92, complies
with EN61010-1 /A2
v
voltag
at
go
y Category Examples
CAT III A typical CAT III environment is the
power distribution system within a
building or factory. These environments
are somewhat protected from lightning
strikes, but susceptible to switching
transients and other disturbances that
may generate high voltage impulses.
CAT II A typical CAT II environment is the
120/240 V distribution system within a lab
or office. These environments are fairly
well protected from external high voltage
disturbances.
CAT I A typical CAT I environment is circuitry
inside electrical or electronic equipment
that is powered by a power supply or a
battery.
To Next Page
Loading...
Need help?
General
