Appendix C: Accessories
THS710A, THS720A, THS730A & THS720P User Manual
C–5
Optional Accessories (Cont.)
A605 and A610 Current Probes
These busbar-style current probes have banana plug connectors
to measure current using the DMM.
A605: AC only, 500 A max, 48 Hz to 1 kHz, 1 mV/A
A610: AC or DC, 500 A max, DC to 440 Hz, 1 mV/A
P6408 Word Recognizer Trigger Probes
The P6408 is a 16-bit word recognizer probe for TTL logic
operating at clock rates up to 20 MHz. This probe is used for
trigger event recognition only, not logic signal display.
WSTR31 WaveStar Software
WaveStar is a Windows application that helps interface the
TekScope instrument to your PC. You can upload and download
waveforms and setups. You can export acquired data to
spreadsheets for further analysis, to word processors to integrate
with your documentation, or to printers and plotters to make hard
copies.
Manuals
Programmer Manual (070-9751-XX) provides information about
remote-control operation.
Service Manual (070-9752-XX) provides information about
maintenence and module-level repair.
To Next Page
Loading...
Need help?
General
