General-Purpose Application Examples
THS710A, THS720A, THS730A & THS720P User Manual
2–17
Setup to Display an Unknown Signal
SCOPE AUTO
RANGE
— — —
The autorange feature sets the vertical, horizontal, and trigger
automatically for a usable display. If the signal changes, the setup
tracks those changes.
Going Further
If the autorange setup does not display the waveform exactly the way
you like, you can easily change the setup. Press any of the buttons
below to cancel autorange mode and modify the setup:
H VOLTS/DIV
H SEC/DIV
H TRIGGER LEVEL
H SET TRIGGER LEVEL TO 50%
To Next Page
Loading...
