Power-Measurement Application Examples
THS710A, THS720A, THS730A & THS720P User Manual
2–53
Setup to Use Motor Trigger
S
PE
AUTO
RANGE
— —
TRIGGER
MENU
Trigger Type Motor
Adjust the TRIGGER LEVEL for a stable display. You can use
motor trigger to stabilize the display of complex, pulse-width
modulated, motor drive waveforms.
Going Further
You can use the horizontal MAG function to get a closer look at the
motor drive waveform.
To get an even closer look at a pulse in the waveform, place vertical
cursors around the pulse of interest and use the delayed time base.
S
PE
CURSOR Cursor
Function
V Bars Set cursors
to pulse of
interest
HORIZON-
TAL MENU
Set Delay
With Cursor
V Bars
— —
To Next Page
Loading...
