Introduction
Spanish, Portu
guese, Italian, Japanese, Simplified Chinese, Traditional Chinese,
Russian, and Korean.
The VERSION & CAL menu. This submenu allows you to view instrument
information including model and serial number, software version, and calibration
date. You can also access information on battery level, status total capacity, time
to em pty, and battery serial number.
The CONTRAST and LIGHT menu. This menu item allows you to adjust display
contrast and to dim the display. Use the right or left arrow keys to dim the display.
Use the up and down arrow keys to adjust display contrast.
Zoom
Press the Zoom buttontozoominonaspecified segment of a waveform. The
menu allows you to access the following:
GLITCH: Select on or off.
ZOOM: Adjust the zoom using the up and down arrow keys.
ZOOM ON/OFF: Select on or off.
Initial Setup
The following procedures describe how to power your instrument, turn it on and
off, quickly verify that your instrument is powering on and functioning correctly,
compensate passive probes using the built-in compensation signal and set the
time and date.
You should perform all initial setup procedures the firsttimeyouusethe
instrument.
You should perform the probe compensation procedure whenever you attach a
passive probe for the first time to a ny input channel.
Battery Power
This instrument can be powered by the THSBAT, a 10.8 V custom UL recognized
Li-ion battery pack. See the instructions that come with the battery for installation
information. You can also find those instructions on the Tektronix Web site at
www.tektronix.com/manuals.
Before using the battery, read the THS3014 and THS3024 Four Channel
Handheld Oscilloscopes Installation and Safety Instructions tha
t shipped with
your instrument for important battery related safety information. This manual can
also be found on the Tektronix Web site at www.tektronix.com/manuals.
WARNING. Fire can cause personal injury and/or property damage. To prevent
risk of fire, d o not use any battery but the battery Tektronix shipped with this
product. Only use the THSBAT battery pack with this product.
THS3000 Series Oscilloscopes User Manual 9
To Next Page
Loading...
