Aligna
®
4D User Manual
73 / 84
11 Safety Instructions
The device is manufactured according to the International Laser Safety Standard IEC 825-
1:1993 and complies with US laws FDA 21 CFR §1040.10 und §1040.11.
DANGER! The device should only be opened by appropriately trained personnel. Before
opening, the supply cable must be disconnected from the mains.
DANGER! For safe operation, use the provided supply cables. Improper or missing con-
nection to protective ground can lead to serious injury.
CAUTION! Laser light is potentially harmful to the human eye.
CAUTION! Apply the legally specified protective measures for lasers. In particular, make
sure that it is not possible to look into the laser beam under conditions, which
exceed the limits specified by the United States Food and Drug Administration.
If in doubt, avoid exposure to a direct or reflected beam.
NOTICE! The device has been designed for operation in laboratory environment with a
temperature range between +15 °C and + 45 °C. The system is not to be oper-
ated in a hazardous environment. Avoid exposure to heat, or to emissions of
other electric equipment. Protect the system against humidity, dust, aggressive
fluids, or vapors.
NOTICE! For connection of the components use no other cable than the one delivered
with your device.
Using standard cables like those used for personal computers can lead to mal-
function or damage of electronic components.
Store the manual at a place where it is easily accessible in order to secure that you can get
quick access to it whenever you need it and that you can quickly refer to it.
Add this guide if you hand over your device to any other person.
To Next Page
Loading...