In this example, the address is “ftp://102.33.66.88”. You can find the WAN IP address of the Mesh
device in WAN port information.
If the default intranet service port number is 80, change the service port number to an uncommon one
(1025–65535), such as 9999.
Enter the user name and password to access the resources on the FTP server.
If you want to access the server within a LAN using a domain name, refer to the solution
DMZ
+
DDNS
.
After the configuration, if internet users still cannot access the FTP server, close the firewall, antivirus
software and security guards on the host of the FTP server and try again.
To Next Page
Loading...
