Specifies the type of your ISP, such as Normal, Russia, Unifi, Maxis, Celcom, Digi and
Manual. Parameters required for each option may differ.
The available options may vary with models. Refer to the product that you purchased.
Refer to the following to choose your connection type:
−
Normal, Unifi, Maxis, Celcom and Digi: Select these options when your ISP
provides no setup information, except for the PPPoE user name and
password, or static IP address information.
−
Russia: Select this option when your ISP provides dual access information,
such as PPTP, L2TP connection information.
−
Manual: Select this option when your ISP provides VLAN ID information,
besides the PPPoE user name and account, or static IP address.
If you are still not sure, contact your ISP for reference.
Specifies how your Mesh device connects to the internet, including:
−
PPPoE, Russia PPPoE: Select this type if you access the internet using the
PPPoE account and PPPoE password. Russia PPPoE is available only when
you set ISP Type to Russia.
−
Dynamic IP: Select this type if you can access the internet by simply plugging
in an Ethernet cable.
−
Static IP: Select this type if you want to access the internet using fixed IP
information.
−
Russia PPTP, Russia L2TP: These types are available when ISP Type is set to
Russia. If you select Russia PPTP or Russia L2TP, the VPN function will be
disabled.
When the internet connection type is PPPoE, you need to enter the user name and
password provided by your ISP to access the internet.
When the internet connection type is static IP, you need to enter the fixed IP address
information provided by your ISP.
If your ISP provides only one DNS server, you can leave Secondary DNS blank.
When you set ISP Type to Russia, this parameter is required.
It specifies the method for obtaining IP address information to access the “local”
network, where the internal resources of the ISP are located.
To Next Page
Loading...
