This parameter is required only when ISP Type is set to Russia. It specifies how the
WAN port DNS address is obtained, which is Auto by default.
−
Auto: The Mesh device obtains a DNS server address from the DHCP server
of the upstream network automatically.
−
Manual: The DNS server address is configured manually.
Server IP
Address/Domain
Name
These parameters are used for setting up internet access in the dual access network
environment. When you set ISP Type to Russia and Internet Connection Type to
Russia PPTP or Russia L2TP, these parameters are required.
When you set ISP Type to Maxis, Celcom or Digi, this parameter is required.
It specifies the ISP area, including:
−
Maxis: Maxis and Maxis-Special
−
Celecom: Celcom West(BIZ), Celcom West(HOME), Celcom East(BIZ) and
Celcom East(HOME)
−
Digi: Digi-TM, Digi, Digi-CT Sabah and Digi-TNB
When you select Manual for ISP Type, you can configure these parameters.
Internet VLAN ID is required, while IPTV VLAN ID is optional. Blank VLAN ID indicates
that the IPTV function is disabled.
Step 5
Set the Wi-Fi name, Wi-Fi password and login password as required, and click Next.
−
To use the same password for Wi-Fi access and web UI login, keep Set WiFi password to router
login password selected, which is the default setting.
−
To use different passwords for Wi-Fi access and web UI login, deselect Set WiFi password to
router login password, and set Wi-Fi Name and WiFi Password for Wi-Fi login and Login
Password and Confirm Password for web UI login.
−
If you do not want to use a password, select Not encrypted. In this case, any client can access
the network without a password. Selecting this option is not recommended as it leads to low
network security. This option is only available for some models. Refer to the product that you
purchased.
To Next Page
Loading...
