Used to modify the node name.
Indicates the IP address of the secondary node.
Indicates the MAC address of the secondary node.
Indicates the connection signal strength with the primary node.
Shows the online clients that are connected to the secondary node.
Shows the offline clients that are connected to the secondary node before.
A maximum of 30 offline clients can be displayed here. A client will be automatically
deleted from the list if it is offline for 3 days. A client is displayed under Offline Device
after it is disconnected from the network for 90 seconds (wired client)/60 seconds
(wireless client).
Used to remove the node. Removing a node will narrow the Wi-Fi coverage, and the
removed node will no longer join the current network automatically. To add a
removed node again, go to Add a node.
Used to reboot the secondary node.
To Next Page
Loading...
