If the IPv6 network fails, try the following solutions:
−
Ensure that clients connected to the Mesh device obtain their IPv6 address through
PPPoEv6.
−
Consult your ISP for help.
Static IPv6 address
When your ISP provides you with information including IPv6 address, subnet mask, default
gateway and DNS server, you can choose this connection type to access the internet with IPv6.
Configuration procedure:
Step 1
Log in to the web UI.
Step 2
Choose More > IPv6.
Step 3
Enable the IPv6 function.
Step 4
Set the Connection Type to Static IPv6 Address.
Step 5
Enter the required parameters under IPv6 WAN.
Step 6
Click Save.
Parameter description
To Next Page
Loading...
