(A30) Paging output setting
P A G I N G : I N 1
-
> O U T 1
Sets the paging outputs.
Select the output with the Parameter knob, then confirm it with the output ON/OFF key.
(A31) Group selection key setting (when set to ZONEGROUP)
1 G R P 0 1 I N 1
-
> O U T 1
Sets the telephone key to initiate telephone paging.
(A32) Paging group selection (when set to ZONEGROUP)
1 G R P 0 1 I N 1
-
> O U T 1
Select the group to which outputs for telephone paging are assigned.
Each group assigned to one of telephone keys 1 through 8 is saved into the amplifier as a paging group.
(A33) Paging output setting
1 G R P 0 1 I N 1
-
> O U T 1
Sets the paging outputs.
Select the output with the Parameter knob, then confirm it with the output ON/OFF key.
(A29) Paging group selection
(when set to MANUAL)
G R P 0 1 I N 1
-
>M A N U
(A29) Paging group selection
(when set to AUTO)
G R P 0 1 I N 1
-
> O U T 1
Select the group to which outputs for telephone paging are assigned.
This group is saved into the amplifier as a paging group.
(A28) Paging method setting
P A G I N G : M A N U A L
Selects the paging method from MANUAL, AUTO, and GROUP as follows:
MANUAL: Directly select the OUTPUT for paging.
AUTO: One paging group can be set.
ZONEGROUP: Up to 8 paging groups can be set.
MANUAL, AUTO, ZONEGROUP
Setting Range
GRP01 - 32
Setting Range
1 - 8
Setting Range
1 - 8Setting Range
GRP01 - 32Setting Range
1 - 8Setting Range
To Next Page
Loading...
