3-51
■
[Extract Movie]
This function allows you to specify the range of the video to be played, sent, or
saved.
A range of the video is specified by moving the extraction cursors (1), so that the
video range between the cursors can be played, sent, or saved.
[Exporting Movie]
This function sends a range of the video displayed on the monitor, the
range having been specified by the video extraction function. (Refer to 3.3.6
i) Sending patient’s data (Export).)
[Saving Movie]
This function saves a range of the monitor-displayed video specified by the
video extraction function into an external storage medium as a video data.
(Refer to 3.3.6 j) Saving image.)
3-48
(Fig. 1)
(1)
To Next Page
Loading...
