Tomey UD-8000 - Entering;Modifying Patient Information

■ 3-28
3.2.5 Entering/modifying patient information
■ If the patient information and measurement data
already exists, make sure that both the new patient
information and existing measurement data belong to
the same patient before replacing the existing patient
information with the new data.
■ The patient’s ID can be entered only when the patient
information entry screen is displayed.
■ A patient ID cannot be changed once it is saved.
■ A warning sound occurs if a startup screen appears
without a patient data display area or if an ID is entered
on the utility screen by an external ID input device.
■ Only the first 14 digits of the ID number are displayed
in the patient information field. Check that the ID
number is correct on the patient information entry
screen.
■ If the instrument is connected to OA-1000 and working
at identical-ID mode, patient information entered is
entered on the OA-1000 side as well. Carefully
confirm how to handle patient IDs before connecting
the instrument to an external device.
■ The network support system “TOMEY Link” (optional)
is required to use the patient information query
function. “DATA Transfer” provided with the Machine is
not available for query of the patient data.
■ For details on the TOMEY Link Server settings, refer to
the TOMEY Link instruction manual.
■ Appropriate connection settings are required for
connection with TOMEY Link.
Refer to “3.12.2 d) Tomey
Link connection settings” to make settings.
■ Once examination data is output (printed, saved, or
exported), the patient ID cannot be changed.