■
5-10
5.6 Storing
■
Install the instrument in a location free of water or
chemicals. Any water or chemicals entering the
instrument may cause an electric shock or failure.
■
Do not store the instrument in a location where
chemicals are stored or gases may occur. Spilt
chemicals or vapor may enter the instrument and
result in fire.
■
Disconnect the power cord from the outlet to ensure
safety when the instrument is not operated for 1 month
or longer.
■
Store the instrument in a location not subject to direct
sunlight, high temperature and humidity, or air
containing dust, salt and/or sulfur. Otherwise, failure or
malfunction may occur.
■
Store the instrument in a leveled stable place free of
vibration or mechanical impact. Otherwise,
measurement cannot be conducted correctly. The
instrument may also topple over or fall down, resulting
in fire or a fatal accident.
z Clean and dry the measurement probe, attach the protective cap, and place it in the probe
case for storage.
z When the instrument is not used for a while, check that the instrument is operating
correctly before starting operation again.
Storage conditions
● Ambient temperature range: -20 – +50°C
● Relative humidity range: 45 – 85%
To Next Page
Loading...
