Tomey UD-8000 - Switching Modes

3-35 ■
3.2.7 Switching modes
(a) Switching normal modes
■ When the mode is changed, all data captured in the
previous measurement mode is deleted. Be very
careful when performing initialization.
1) Touch the “Select mode” button (1) to open the mode selection window (Fig.
2).
2) Select the desired mode and then touch the “OK” button (2). Touching the
“Cancel” button (3) closes the window without changing the mode.
3-27
(1)
(Fig. 1)
(3) (2)
3-34
(Fig. 2)
3-34