Tomey UD-8000 - Various Functions in Real Time Mode

3-101 ■
3.3.7 Various functions in real time mode
Functions that are enabled in the real-time menu vary depending on the selected probe. See
the following table:
Table 1: Real-time menu functions for individual probes
15MHz 60MHz
Vector-A ○ ×
Smoothing ○ ×
Frequency ○ ×
Scan mode ○ ○
Scope ○ ×
Target ○ ×
Image quality setting ○ ○
a) Vector mode-A
Refer to “3.3.6 (c) Vector mode-A.”
b) Smoothing
■ This function can be used only when the 15 MHz B
probe is selected.
Refer to “3.3.6 (d) Smoothing.”