■
3-108
3.4.1 Obtaining ultrasound image
■
Be sure that the screw is not loose when you use the
arm. A loose screw may cause the probe attached to
the arm to drop, which may damage the probe or injure
the patient's eye or eye lid. Operating the arm directly
with your hand may injure your finger pinched by the
arm.
■
Be sure to touch the “New” button to delete all the
measurement data of the previous patient before
measuring another patient. If new measurement is
started without deleting the previous data, the
measurement data of the previous patient may be
included.
■
Releasing the freeze state by touching the RREEZE
button or stepping on the FREEZE pedal (Footswitch)
deletes all images previously obtained. Be very careful
when performing initialization.
3-81
(1)
(Fig. 1)