Tomey UD-8000 - Selecting an Eye

3-27 ■
3.2.4 Selecting an eye
■ Select an eye when starting up the instrument,
switching an operation mode, and newly measuring an
eye.
On starting up the instrument, changing operation mode, and examining a
new patient, the eye selection screen appears. Select the eye to be
measured. You can also select an eye in the eye selection tab (1) of each
screen. However, you can not access the tab during a real-time process
with the B-mode image diagnosis or the axial length measurement auxiliary
function.
(1)
3-27
(Fig. 2)
3-26
(Fig. 1)