Tomey UD-8000 - Corneal Thickness Measurement Display Function (Available Only When AL-4000 Is Connected); Setting the Data Type to be Displayed; Setting Measurement Conditions

3-151 ■
3.8 Corneal thickness measurement display function (available
only when AL-4000 is connected)
3.8.1 Setting the data type to be displayed
Select the measurement data type to be displayed from the following three
options.
Latest: Displays the last measurement data taken.
Minimum: Displays the minimum value of measurement data.
Average: Displays the average of measurement data.
Refer to “3.10.2 p) Corneal thickness setting” in Utility to make the setting.
3.8.2 Setting measurement conditions
1) Touch the “Change Setting” button (1) to display the setting menu screen.
(Fig. 1)
(1)
3-110