■
3-2
3.1.1 Precautions for installing the instrument
■
Install the instrument in a location free of water or
chemicals. Any water or chemicals entering the
instrument may cause an electric shock or failure.
■
Do not install the instrument in a location where
chemicals are stored or gases may occur. Spilt
chemicals or vapor may enter the instrument and
result in fire.
■
Install the instrument in a location not subject to direct
sunlight, high temperature and humidity, or air
containing dust, salt, and/or sulfur. Otherwise, failure
or malfunction may occur.
■
Install the instrument in a leveled stable location free of
vibration or mechanical impact. Otherwise,
measurement cannot be conducted correctly. Also, the
instrument may topple over or fall down, resulting in
fire or a serious accident.
■
Install the instrument so that the user can use the
system under optimal conditions. Carefully connect
the devices so that the wiring is not disconnected
unintentionally during operation, and does not hinder
operation of the instrument.
To Next Page
Loading...
Need help?
General
