Tomey UD-8000 - Axial Length Measurement Result Display Function (Only When Connecting AL-4000;OA-1000); Pachymetry Measurement Result Display Function (Only When Connecting AL-4000); A-Scan Diagnosis Result Display (Only When AL-4000 Is Connected)

1-11 ■
1.4.3 Axial Length Measurement Result Display Function (only when
connecting AL-4000/OA-1000)
● Receives and displays waveform data, measurement data,
etc. from axial length and pachymetry measurement unit
AL-4000 or light interference method axial length
measurement unit OA-1000 connected via wireless or wire.
● This instrument has by default eight IOL power formulae and
can perform IOL power calculation immediately after
receiving axial length measurement results from axial length
and pachymetry measurement unit AL-4000 or light
interference method axial length measurement unit OA-1000.
1.4.4 Pachymetry Measurement Result Display Function (only when
connecting AL-4000)
● Receives and displays waveform data, measurement data,
etc. from axial length and pachymetry measurement unit
AL-4000 connected via wireless or wire.
1.4.5 A-scan diagnosis result display (only when AL-4000 is connected)
● This function receives and displays mode-A waveform data
from AL-4000, the axial length and pachymetry measurement
unit, through a wireless or wired connection.