■
3-134
2) Touch the “measurement mode selection” button (1) to display the
measurement data in the order of Axial -> ACD -> Corneal thickness. In the
corneal thickness mode, when the measurement data received from
OA-1000 contains CCT (ultrasonic correction value for corneal thickness)
(2), it is displayed in the measurement data display field. (Fig. 2)
3) Touch the “selection cursor movement” button (3) or the memory number
directly to select the measurement data to be displayed. Measurement
waveform of the selected data will be displayed in the measurement
waveform display field (4).
To Next Page
Loading...
