3-139
■
3) The measurement value is displayed in the measurement data display field
(4) in real time. Use the scroll bar (5) to move the waveform being displayed
to the left or right. In addition, by touching the “Zoom” button (6), the
displayed waveform is enlarged or reduced according to the 4 preset levels.
Cornea waveform measurement line is displayed in yellow dotted line.
4) Touch the “caliper line movement” buttons (8) to change the position of the
caliper line (9) which is being displayed in red dotted line. Meanwhile, in
response to the movement of the caliper line, the selected measurement
value is changed and the average value is recalculated. A “C” mark (10)
appears at the top of the callipered measurement value.
5) Touching the “Initial Position” button (11) will cancel the changes made,
and the caliper line will return to the position before being edited.
6) Touching the “Apply” button (12) will reflect the changes made, and the
caliper screen is closed. Touching the “Cancel” button (13) will discard the
changes made, and the caliper screen is closed.
To Next Page
Loading...
