3-165
■
a) Re-measurement of the same patient
■
The deleted data cannot be restored. Carefully check
the data before deleting it.
■
Be sure to touch the “New” button to delete all the
measurement data for the previous patient before
measuring another patient. If the data of the next
patient is captured without touching the “New” button,
the patient information does not match the captured
data.
Retain the patient information and delete only the measurement data for
each eye. Delete all data referring to “3.2.7 Clear all measurement data
(preparation for measuring a new patient)” when the patient is changed.
Touch the “Retake” button (1) for approximately 1 second until a beep
sounds to delete the data.
It retains the patient information and the measurement data of the eye other
than the inspected eye being displayed.
(Fig. 1)
(1)
3-123
To Next Page
Loading...
