Tomey UD-8000 User Manual

■ 3-174
b) Setting the beam direction
Use this function to change the position to apply the probe or the direction
of the ultrasound beam, or to display the position of a point of note (with
pathocological changes, etc.).
1) Touch the menu tab to open the real time menu window.
2) Touch the “Probe orientation selection” button (1) to open the probe
orientation selection window (2). The probe orientation changes as you
select a probe position. (Fig. 2)
3) Touch the “Beam direction display 1” (3) to display the pull-down menu.
Select a number from 1 to 12. This helps indicate the angle of the meridian.
(Fig. 3)
4) Touch the “Beam direction display 2” (4) to display the pull-down menu.
Select a beam direction. This helps to specify a notable point in an eyeball.
(Fig. 4)
(Fig. 3) (Fig. 2)
(Fig. 4)
3-595
3-596
3-597
3-655
(Fig. 1)
(3) (4) (1)
(2)

Tomey UD-8000 Specifications

General

Brand	Tomey
Model	UD-8000
Category	Medical Equipment
Language	English