Tomey UD-8000 - Page 258

■ 3-202
(5) OA Connection Setup (axial length measurement function only)
Sets the connection with OA-1000.
Refer to “3.12.2 l) OA Connection Setup” for the setting method.
(6) Print Setting
Sets which printer to use and which content to print.
Refer to “3.12.2 e) Print Setting” for the setting method.
(7) Data Management
Manages the stored data.
Refer to “3.12.2 j) Data Management” for the setting method.
(8) IOL Data Setup
Registers the IOL data.
Refer to “3.12.2 m) IOL Data Setup” for the setting method.
(9) IOL Formula Setup
Registers the parameters which are used in IOL calculation.
Refer to “3.12.2 n) IOL Formula Setup” for the setting method.
(10) Axial Setup
Sets items related to measurement of the axial length.
Refer to “3.12.2 o) Axial Setup” for the setting method.
(11) Version Information
Displays the version information.
Refer to “3.12.2 q) Version Information” for details.
(12) Extended export setting (Extended Export)
Sets the extended export.
Refer to “3.12.2 r) Extended Export” for details.