Tomey UD-8000 - Page 293

3-237 ■
l) OA Connection Setup
(1) Patient ID (US/Opt)
Sets how to handle the measurement data according to the ID in the ultrasonic (US) mode
and light interference (Opt) mode.
Common ID: The same ID is used in both of the ultrasonic (US) mode (axial length
measurement, corneal thickness measurement) and light interference (Opt)
mode.
■ The ID and measurement data are not cleared even
when the axial length measurement and corneal
thickness measurement are switched in the ultrasonic
(US) mode.
■
For a new patient, the ID and measurement data in all
modes are cleared.
Individual ID: Separate IDs can be used in the ultrasonic (US) mode and light interference
(Opt) mode.
■ The ID is cleared when the axial length measurement
and corneal thickness measurement are switched in
the ultrasonic (US) mode.
3-159
(1)
(3)
(2)