■
2-6
Touching the “R” or “L” button displays the measurement screen for the selected eye.
(2) “Probe selection” button
Selects a probe to be used for measurement.
(3) “Patient information entry” button
Opens the patient information entry screen.
(4) Patient information field
Displays the patient information entered on the patient information entry screen.
(5) “New” button
Deletes all the Patient information and measurement data, and prepares to measure a new
patient.
(6) “Mode selection” button
Allows you to select measurement mode from B-Diag, B-Axial, Axial, or Pachy.
(7) “Print” button
Prints the entire screen. Refer to “3.12.2 e) Print settings” for the settings of a printer to which the
instrument is connected.
(8) “R/L” button
Displays the R/L alignment display screen. (See “3.3.6 r) R/L Alignment Display Screen.”)
(9) “Utilities” button
Opens the utility screen. (See “3.12 Utility.”)
(10) AL-4000 wireless communication status field
Represents with an icon the status of wireless communication with AL-4000.
Communicating via
wireless access:
Communicating via USB:
Communication stopped:
Communication not
possible:
* Operations not possible.
Utility operations are required for connection.
To Next Page
Loading...
