■
3-12
i) Connecting a personal computer
■
When operating this instrument connected to a
computer for Data
・
Transfer, only use devices that
satisfy IEC60601-1 or equivalent safety requirements
or that conform to IEC60950 and whose power source
is insulated with an isolation transformer, in order to
satisfy the relevant safety requirements for medical
equipment.
■
The network support system “TOMEY Link” (optional)
or the inspection data receiving software “DATA
Transfer” (included in the package) is required for data
communication with the Machine.
■
Refer to the corresponding operation manual for
installation, settings, and operation of TOMEY Link and
DATA Transfer.
■
Appropriate connection settings are required for
connection with TOMEY Link and DATA Transfer.
Refer
to “3.10.2 d) Tomey Link connection settings” to make
settings.
■
Be sure to make network settings under the consent
of your network administrator.
There are two methods to connect with a personal computer: LAN
connection and USB connection.
To Next Page
Loading...
Need help?
General
