Topcon ASC-10 - Page 15

xi
5.4.2. Selecting / adding a product 43
5.4.3. Filling tanks 45
5.5. Configuring and calibrating 47
5.5.1. Wheel sensor calibration 49
5.5.2. Flow meter calibration 50
5.5.3. Valve balancing wizard 51
5.6. Setting area counters 53
5.7. Using the master switch 57
Chapter 6 – Operation (X14) 59
6.1. Opening auto section control 60
6.2. Opening the sprayer controller 61
6.3. Configuring tanks and application rates 62
6.3.1. Tank colors 63
6.3.2. Selecting / adding a product 64
6.3.3. Filling tanks 66
6.4. Configuring and calibrating 68
6.4.1. Wheel sensor calibration 69
6.4.2. Flow meter calibration 70
Chapter 7 – Variable Rate Control 71
7.1. If using VRC maps 71